Posts
Energy and environment
- Get link
- Other Apps
Charcoal making Aim :- Making charcoal with the help of biomass. Requirments :- Tin barrel , tin pipe , match box, B io waste (5 kg) ,wheat power (500 gm) Procedure :- W e take a tin barrel and we make holes on tin barrel at the part of side surface at middle we put holes after that we put bio waste in the barrel . We burn the bio waste in the barrel slowly slowly and we cover the barrel with the help of tin plate and put the tin pipe at the upper surface at the cap surface .We burn it for three hours after extinguish fire we remove the charcoal in it and after some times we make a powder of charcoal and put atta for stickyness for giving shape also .we mix charcoal and aata .And we put it in sunlight After then we give it shape like a ball,cube etc and do packing . Observation :- 1)When we burn it we should keep tin plate because if we not keep it , it will be burn fastly 2) When we burn
- Get link
- Other Apps
stool making October 10, 2017 Stool making Aim:-Hand made stool Requirements:-Ply wood, San Mick, nail's process:-First l take a plywood and cut it in to two pieces measure it by 3feet of width and height in to same 3feet and cut it in to two pieces and at 1.6 on plywood cut a U shaped hole and fix both of them and at the top surface l take round faced measured plywood and hammered it with nail's and I designed it half heartcutted and apply it on the stool Conclusion:-I learned about how to make a innovative stool.
wooden box making
- Get link
- Other Apps
Stool making Aim:-Hand made stool Requirements:-Ply wood, San Mick, nail's process:-First l take a plywood and cut it in to two pieces measure it by 3feet of width and height in to same 3feet and cut it in to two pieces and at 1.6 on plywood cut a U shaped hole and fix both of them and at the top surface l take round faced measured plywood and hammered it with nail's and I designed it half heartcutted and apply it on the stool Conclusion:-I learned about how to make a innovative stool.
- Get link
- Other Apps
Fixing sunmica on plywood Date:-30 august 2017 Aim:- fixing sunmica on plywood Requirements:- plywood, sunmica, nails, fevicol, stool, all carpentry work tools. Procedure:-make wooden box to fix sunmica. cut plywood to required size using saw cut sunmica to required size use fevicol to plywood and put the sunmica over it keep weight or small nail and abro tape to hold sunmica to plywood till it sticks. Observation:- care and tricks of cutting and handling sunmica. take care while cutting and handling plywood. tricks to hold sunmica with plywood. Result:-we see after some time the sunmica are perfect stick to plywood. Images:-